Filter

Semi-automatic Glue Dispenser

  • Using 0.18CV constant flow solenoid control valve, with indicator switch, adjustable air suction device up to 15 inches/mercury (Hg).
  • Precise control of dispensing drops and dispensing cycle; Two Controlling Modes: manual mode & semi-automatic mode.
  • Manual Mode: Continuous or momentary, it’s adjustable.
SKU: MY-982 Category:

Specifications:
– Power : AC 110V ± 10% / 50Hz
– Power consumption : <8W
– Air source : Maximum 0.99MPa ( clean dry air without lubrication )
– Pressure adjustment range : 0.05MPa-0.99MPa
– Time adjustment range : 0.01S–30S, the time available to a variety of modes
– Function Mode : Manual mode / automatic mode
– Vacuum features : adjustable negative pressure control to 600 mm Hg
– Repeatability and spit Frequency: Accuracy : ± 0.05% Frequency: 600 beats / min
– Minimum discharge rate : 0.01ml
– Dimensions : 235mmx225mmx60mm
– Weight : 2.2kg

Operating mode :
– Automatic operation (auto) ( applicable to quantitative, non-timed dispensing )
The switch to automatic auto position. Adjust the pressure and volume of the plastic, choose the right needles that can control the flow of liquid material correctly.
Every step on a footswitch, the liquid material will be in accordance with the glue set automatically drop out from the needle hole.

– Hand-operated (manual) ( applicable to non-quantitative , non-timed dispensing )
The switch to the manual position. Adjust the air pressure and select the appropriate needles. Depress the footswitch, the liquid material will drip from the needle hole, release the footswitch to stop the liquid material drops out.